Plastic Mold Maker

Overview and precautions of mold processing

Mold processing refers to the processing of tools used for molding and blanking, and also includes shearing dies and die-cutting dies. Usually, the mold consists of two parts: the upper die and the lower die. Under the action of the press, the steel plate is placed between the upper and lower dies to achieve the molding of the material. When the press is opened, the workpiece determined by the shape of the mold can be obtained or the corresponding waste can be removed. Whether it is a small electronic connector or a large car dashboard, it can be formed by the mold. At the same time, **progressive die** is a special mold that can automatically move the processed workpiece from one station to another and form a molded part at the last station.

plastic mold maker face assembly processing processes including: cutting die, blanking die, compound die, extrusion die, four-slide die, progressive die, stamping die and die-cutting die. Many merchants have an urgent need for injection mold processing and are expected to need a large number of injection molds. Therefore, before cooperating with manufacturers, special attention must be paid to their processing capabilities and product supply. This should be taken seriously when cooperating through local physical manufacturers or networks. Since many injection molds are customized according to the specific needs of customers, it is particularly important to compare the processing of samples, which should never be ignored.

When contacting Plastic Injection Molding Mold Manufacturers, it is crucial to make sure that you understand what services the other party can provide. Especially when establishing long-term cooperation with some large manufacturers, they are usually willing to provide sample processing services. It is recommended to check whether the other party’s samples meet the needs and whether the quality is satisfactory before deciding to cooperate. If the other party cannot provide samples, direct large-scale processing may cause various problems, which are difficult to return and resolve, so extra caution is required.

If there are manufacturers who can provide high-quality sample processing, you should also pay attention to their quotations. Nowadays, many injection mold processing manufacturers have their own official websites, and you can contact their customer service through the Internet to confirm the processing services they can provide. After confirming that the samples meet the requirements, subsequent wholesale cooperation can be carried out.

Processing process breakdown
The following are some specific links in mold processing:

– Cutting: front mold material, rear mold material, insert material, slide material, inclined ejector material
– Frame opening: front mold frame, rear mold frame
– Roughing: front mold cavity roughing, rear mold cavity roughing, parting line roughing
– Copper male: front mold copper male, rear mold copper male, parting line corner copper male
– Wire cutting: insert parting line, copper male, inclined ejector pillow
– Computer gong: fine gong parting line, fine gong rear mold core
– EDM: front mold roughing, copper male, male mold line corner cleaning, rear mold bone position, pillow position
– Drilling, pinhole and ejector
– Mold ejector hole waterway hole processing
– Slide and slide pressure pole
– Inclined ejector
– Complex ejector and matching ejector
– Other parts: such as nozzles, code pits, garbage pins (limit pins), flying molds, nozzles, support heads, springs and water transport parts
– Mold saving and polishing treatment
– Production of fine water structure, pull rod screw hook and spring**
– Heat treatment and quenching of important parts
– Nitriding treatment of slide surface

Through the above detailed process, it is possible to more effectively meet the mold processing needs and precision requirements, and enhance the cooperation effect with plastic mold manufacturers.